• Bathroom Hardware

  • Pivot & Hinge Door Systems

  • Balustrade & Pool Fence Hardware

  • Pool Gate Hardware

  • Spider Systems

  • Ultraclear Glass Panels

  • Canopy Systems

  • Sliding Door Systems

  • Glazing Supplies & Tools

  • Anchor Fixings

  • Folding Door Systems

  • Stacking Door Systems

  • Product Samples

    10mm Ultraclear Toughened Glass Sliding Shower Screen Panel & Hardware Kit – Return, Fixed, Door & Return

    0 customer reviews

    SKU: RSSDR1

    From $0.00 Inc. GST

    • This kit is for one fixed side panel and one door panel, please refer to the other 2 combinations of front only sliding screens, 3 combinations of front/return sliding screens and 3 combinations of return/front/return sliding screens.
    • For opening the sliding door there is a Ø50mm polished hole, otherwise add a Finger Pull (SDFP60 or SS.9) in a matching finish that fits into that same hole.
    • It may not be essential but a waterbar (MWB10, MWS3 or MWS3-1M) can also be ordered to prevent water escaping from the shower area.
    • If you require assistance please email your drawing with dimensions and levels to customer.service@mfgs.com.au
    -
    +
    -
    +
    -
    +
    -
    +
    -
    +

    How to choose the panel sizes required:

    1. Measure the overall width & depth
    2. Determine the minimum overall width and refer to the tables for suitable panel width combinations
    3. Determine the minimum overall depth, allow 3mm clearance at the wall and refer to the tables for suitable return panels
    4. Depending on the depth required, the return panels may need CH30 channel
    5. If you require assistance please email your drawing with dimensions and levels to customer.service@mfgs.com.au

    Reviews

    There are no reviews yet.

    Be the first to review “10mm Ultraclear Toughened Glass Sliding Shower Screen Panel & Hardware Kit – Return, Fixed, Door & Return”

    Your email address will not be published. Required fields are marked *


    10mm Ultraclear Toughened Glass Sliding Shower Screen Panel & Hardware Kit – Return, Fixed, Door & Return

    0 customer reviews

    SKU: RSSDR1

    From $0.00 Inc. GST

    • This kit is for one fixed side panel and one door panel, please refer to the other 2 combinations of front only sliding screens, 3 combinations of front/return sliding screens and 3 combinations of return/front/return sliding screens.
    • For opening the sliding door there is a Ø50mm polished hole, otherwise add a Finger Pull (SDFP60 or SS.9) in a matching finish that fits into that same hole.
    • It may not be essential but a waterbar (MWB10, MWS3 or MWS3-1M) can also be ordered to prevent water escaping from the shower area.
    • If you require assistance please email your drawing with dimensions and levels to customer.service@mfgs.com.au
    -
    +
    -
    +
    -
    +
    -
    +
    -
    +