How to choose the panel sizes required:

1. Measure the overall width and depth
2. Check the level of the walls, anything over 5mm out may require channel (CS15, CH15 or CH30) instead of brackets and possibly a custom made hinged or return panel
3. Determine the minimum width
4. Subtract the prefered door width, 10mm for return panel thickness and 9mm for clearances
5. Depending on the dimension produced for the hinged panel you may need to use channel (CS15, CH15 or CH30) instead of brackets (MB10 or MBS10)
6. Determine the minimum depth
7. Depending on the dimension produced for the return panel you may need to use channel (CS15, CH15 or CH30) instead of brackets (MB10 or MBS10)
8. There are too many options to list for hinges, brackets, handles and waterbars to include with the glass kit (please add them seperately)
9. Suitable hinges for this panel combination include MF2
10. Suitable brackets for this panel combination include MB10 or MBS10 or channel include CS15, CH15 or CH30
11. Suitable handles for this panel combination include M152, M152K, MS152, MS152K, GTFR150, GTFS150
12. Suitable waterbars for this panel combination include the MWB10, MWS3 & MWS3-1M
13. If you require assistance please email your drawing with dimensions and levels to customer.service@mfgs.com.au